Physical Property Testing Equipments

UEC-1001

The Quadrant Scale is intended for measuring the Basis Weight (GSM) of Paper and other sheet materials by weighing a small Test Sample with given dimensions. Scales are calibrated to Precision Dead Weights. This accuracy is maintained as long as the pendulum returns to its original form and is kept free from corrosion,

It is used for measuring the basis weight GSM of paper and other sheet materials by weighing a small test sample with given dimensions. The GSM readings of the specimen display directly on screen.

Suitable for different size of paper :

• 10 x 10 cm.
• 20 x 20 cm.
• 20 x 25 cm.
• 25 x

UEC-1003 B
SAMPLE CUTTER CIRCULAR

It is Used for preparation of Circular Test Samples of Paper, Paper Board & Corrugated Board and  other similar materials towards the Testing of  FCT etc. The Samples are prepared by turning of the wheel along the Circumference. Circular Sample Cut Size - 100 cm2 Area. more...

UEC-1003 A
SAMPLE CUTTER CIRCULAR

It is used for preparation of circular test samples of Paper, Paperboard and similar materials towards the Testing of GSM. The Samples are prepared, using four knives, by turning of the wheel at 90° angle i.e. one quarter turn along the circumference. Circular Sample Cut Size - 100 cm2

The thickness of sheet is measured as the distance between two circular plane surface, under a steady pressure 1 Kg / cm2 (98.0 Kpa). For rapid and accurate measurement of thickness of paper, board and plastics. Motorized, sturdy, easy to use and “push the button” operation. Digital Display, Mitutoyo (Japan) make add-on type optical

Used for rapid and accurate measurement of thickness of paper, board and plastics. Both Models are compact ones and measure thickness of paper, board, plastic films, rapidly and accurately.

• Measuring spindle with constant lowering speed (1mm/sec). 
• Motorized Dial Type single push-button operation for lowering spindle

The instrument is Manual Hydraulic controlled Dial Type. Lowering speed of the measuring spindle is hydraulically controlled. Hardened and lapped measuring face. Provided with dial type indicator. With Resolution 0.001mm and 0.01mm

Motorized, automatic / manual mode sturdy, easy to use and “push the button” operation. Digital Display, (LVDT) differential transformer used as measuring transducer with high accuracy, measurement in micron, mm, cm, inch, and mills.

• Measuring range - 0-5 mm
• Max stroke - 18 mm
• Resolution - 1 um

This instrument measures the maximum tensile force the test piece will stand before it breaks and the elongation at the moment of rupture. It is used for determining the tensile strength and stretch at break of the paper, board, metal foil, textile and plastics.

Electro-Mechanical tensile tester (Schopper Type) is a reliable and

Electronic Tensile Tester (Vertical Model, Microprocessor Based) – for providing rapid and efficient determination of tensile strength stretch, breaking length and tensile energy absorption of paper and paperboard with in-built printer and imported load cell and imported DC

Automatic Tensile Strength Tester provided with user friendly software which guides the operator through all steps of program selection, parameter modification and sample test to minimize human error during test to provide rapid and efficient determination of tensile strength, stretch, tensile energy absorption (TEA), tensile stiffness,

A fast, accurate and easy instrument for providing rapid and efficient determination of tensile strength and stretch of tissue and other soft material. The instrument is equipped with soft clamps which prevents test pieces from slipping or tearing during measurements. The clamps grip the test piece without any damage for accurate elongation

UEC-1006 A II
SAMPLE CUTTER- ADJUSTABLE (GUILLOTINE TYPE)

The UEC Sample Paper Strip Cutter with Scaling arrangement & Base Plate is used for Accurate and Rapid preparation towards various Samples. The Cutting Blade is made from Special Knife Steel attached with an Automatic Clamping Device, which by means of clamping beam,

Simple paper strip cutter with the Provision to cut the strip sample for tensile test cutting width 15 mm x 300 mm.

A test piece is fastened vertically between two clamps. The upper clamp folds, the test piece by means of the reciprocating circular motion while the lower clamp maintain it under a given load. For determining thefolding endurance of all kinds of paper, paperboard, foils and films with a standard folding speed per minute. Kohler Molin Type with

Schopper Type instrument with Five Figure digital Counter Loading clamps of spring type giving standard load of 1000 gm during the test  with Five –Figure digital Counter having hold and zero setting.

Two horizontally opposed and moveable clamping jaws, which hold specimen 100 mm (4 in.) long under variable tension during

This instrument has a spring loaded clamping jaw constrained to move without rotation in a direction perpendicular to the axis of rotations of the specified folding head and having its clamping surface in the plane of this axis. The load is applied by a precision attached to the jaw assembly which is easily adjustable to provide any desired

This instrument is used for measuring the resistance against tearing of paper, board, plastic films and other similar materials. An initial cut is made in a set of test piece, which are then torn through a given distance.  The work done in the test piece is measured as the loss in potential energy of a pendulum which is free to swing on it

Electronic Tearing Resistance Tester with standard medium 'B' pendulum with the facility of automatic clamping of the test specimen with a single touch, automatic calculations through Microprocessor based hardware which displays in values as well as in graph on touch screen cum graphical LCD control panel. These test results can be transferred

The Precision Test Strip Punch & Die Cutters are intended for accurate and rapid preparation of test pieces for use in tensile strength tests, ring crush tests, folding endurance test, water absorbency test and other similar tests without any deformation and damage. It is suitable for cutting a very wide range of sheet material such as

Circular Punch & Die Cutter is an excellent and convenient precision cutter for speedy and accurate cutting of specimen 100 cm2 in area without any deformation and damage.

It is extremely useful for the determination of basis weight in paper machines profile when used in conjunction with GSM Scale. The Punch Cutter has a high

Automatic sample punch die cutter with adjustable punching cycle. Circular Punch & Die Cutter is an excellent and convenient precision cutter for speedy and accurate cutting of specimen 100 cm2 in area without any deformation and damage of paper & tissue.

This automatic punch cutter can be easily set to cut multiple samples