Latest Products https://www.uecindia.com Latest Products Fri, 02 Nov 2018 16:40:23 +0530 en-us https://www.uecindia.com Physical Property Testing Equipments https://www.uecindia.com/physical-property-testing-equipments.htm https://www.uecindia.com/physical-property-testing-equipments.htm Wed, 09 Sep 2015 00:00:00 +0530 Paper is a complex product so the final goal is to achieve good quality finished products for printing, converting and other usage. The results depend on factors like physical thickness, surface, roughness and printability etc. Pulp Testing Equipments https://www.uecindia.com/pulp-testing-equipments.htm https://www.uecindia.com/pulp-testing-equipments.htm Wed, 09 Sep 2015 00:00:00 +0530 One of the most critical aspects of papermaking is pulp quality. The instruments that comprise this section of the catalogue are designed specifically for the analysis of different raw materials. The selection and specimen preparation to further study of cooking pattern and good quality pulp are produced in laboratory scale. Surface Coating & Printability https://www.uecindia.com/surface-coating-printability.htm https://www.uecindia.com/surface-coating-printability.htm Wed, 09 Sep 2015 00:00:00 +0530 The print quality of a paper depends upon roughness of the surface. The features of a paper consist of the fundamental fiber surface properties that change during its production. Apart from printing ink, printing press and human factors, the printing results also depend on absorption, permeability and thickness of the paper. Package Testing Equipments https://www.uecindia.com/package-testing-equipments.htm https://www.uecindia.com/package-testing-equipments.htm Wed, 09 Sep 2015 00:00:00 +0530 Packaging serves protection & safety to the products during transportation & storage. The material used in packaging is essential whether it is a printing paper that has to have run-ability through the printing press or a corrugated board box that has to carry loads. Environmental Testing Equipments https://www.uecindia.com/environmental-testing-equipments.htm https://www.uecindia.com/environmental-testing-equipments.htm Wed, 09 Sep 2015 00:00:00 +0530 This section includes high/low temperature chamber, humidity chamber, ovens chamber, test chamber, high-speed changing temperature chamber, alternating high-low temperature & humidity chamber etc. Handmade Paper Machine https://www.uecindia.com/handmade-paper-machine.htm https://www.uecindia.com/handmade-paper-machine.htm Wed, 09 Sep 2015 00:00:00 +0530 Handmade paper is a sheet of paper or board produced by hand. The raw materials used for making handmade paper are waste products of textile industries, locally available waste fibers and recycled secondary fibers. Quadrant Scale (UEC-1001) https://www.uecindia.com/quadrant-scale-uec-1001.htm https://www.uecindia.com/quadrant-scale-uec-1001.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is intended for measuring the Basis Weight (GSM) of paper and other sheet materials by weighing a small test sample with given dimensions. Scales are calibrated to precision dead weights. Digital Grammage Scale https://www.uecindia.com/digital-grammage-scale.htm https://www.uecindia.com/digital-grammage-scale.htm Tue, 15 Mar 2016 00:00:00 +0530 It is used for measuring the basis weight GSM of paper and other sheet materials by weighing a small test sample with given dimensions. The GSM readings of the specimen display directly on screen. Circular Sample Cutter For Fct (UEC-1003A) https://www.uecindia.com/circular-sample-cutter-for-fct-uec-1003a.htm https://www.uecindia.com/circular-sample-cutter-for-fct-uec-1003a.htm Tue, 15 Mar 2016 00:00:00 +0530 By the rotating wheel to set limit. Cutting out circular sample of corrugated board and similar materials for measurement of Flat Crush Test along with the perimeter cut size area 50 cm2/ 100 cm2  without any deformation and damage. Circular Sample Cutter For (UEC-1003B) https://www.uecindia.com/circular-sample-cutter-for-uec-1003b.htm https://www.uecindia.com/circular-sample-cutter-for-uec-1003b.htm Tue, 15 Mar 2016 00:00:00 +0530 Used for cutting out one / several test specimen circular sample of paper, board and similar materials at a time by the turning of the wheel at 90o angle/a quarter turn, using four knives along with the perimeter cut size area 50 cm2/ 100 cm2 / 150 cm2/ 200 cm2  without any deformation and damage. Digital Thickness Micrometer (UEC-1004 A) https://www.uecindia.com/digital-thickness-micrometer-uec-1004-a.htm https://www.uecindia.com/digital-thickness-micrometer-uec-1004-a.htm Tue, 15 Mar 2016 00:00:00 +0530 The thickness of sheet is measured as the distance between two circular plane surface, under a steady pressure 1 Kg / cm2 (98.0 Kpa). For rapid and accurate measurement of thickness of paper, board and plastics. Motorized, sturdy, easy to use and “push the button” operation. Motorised Dial Type Thickness Micrometer (UEC-1004 C) https://www.uecindia.com/motorised-dial-type-thickness-micrometer-uec-1004-c.htm https://www.uecindia.com/motorised-dial-type-thickness-micrometer-uec-1004-c.htm Tue, 15 Mar 2016 00:00:00 +0530 Used for rapid and accurate measurement of thickness of paper, board and plastics. Both Models are compact ones and measure thickness of paper, board, plastic films, rapidly and accurately. Manual Lifting Model Thickness Micrometer (UEC-1004 D) https://www.uecindia.com/manual-lifting-model-thickness-micrometer-uec-1004-d.htm https://www.uecindia.com/manual-lifting-model-thickness-micrometer-uec-1004-d.htm Tue, 15 Mar 2016 00:00:00 +0530 The instrument is Manual Hydraulic controlled Dial Type. Lowering speed of the measuring spindle is hydraulically controlled. Hardened and lapped measuring face. Provided with dial type indicator. With Resolution 0.001mm and 0.01mm Automatic Thickness Micrometer (UEC-1004 F) https://www.uecindia.com/automatic-thickness-micrometer-uec-1004-f.htm https://www.uecindia.com/automatic-thickness-micrometer-uec-1004-f.htm Tue, 15 Mar 2016 00:00:00 +0530 Motorized, automatic / manual mode sturdy, easy to use and “push the button” operation. Digital Display, (LVDT) differential transformer used as measuring transducer with high accuracy, measurement in micron, mm, cm, inch, and mills. UEC-1005 A Tensile Strength Tester (Electro-Mechanical) https://www.uecindia.com/uec-1005-a-tensile-strength-tester-electro-mechanical.htm https://www.uecindia.com/uec-1005-a-tensile-strength-tester-electro-mechanical.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument measures the maximum tensile force the test piece will stand before it breaks and the elongation at the moment of rupture. It is used for determining the tensile strength and stretch at break of the paper, board, metal foil, textile and plastics. UEC-1005 B Tensile Strength Tester (Electronic) https://www.uecindia.com/uec-1005-b-tensile-strength-tester-electronic.htm https://www.uecindia.com/uec-1005-b-tensile-strength-tester-electronic.htm Tue, 15 Mar 2016 00:00:00 +0530 Electronic Tensile Tester (Vertical Model, Microprocessor Based) – for providing rapid and efficient determination of tensile strength stretch, breaking length and tensile energy absorption of paper and paperboard with in-built printer and imported load cell and imported DC Drive. UEC-1005 D Tensile Tester (Horizontal Model, Microprocessor Based) https://www.uecindia.com/uec-1005-d-tensile-tester-horizontal-model-microprocessor-based.htm https://www.uecindia.com/uec-1005-d-tensile-tester-horizontal-model-microprocessor-based.htm Tue, 15 Mar 2016 00:00:00 +0530 Automatic Tensile Strength Tester provided with user friendly software which guides the operator through all steps of program selection, parameter modification and sample test to minimize human error during test to provide rapid and efficient determination of tensile strength, stretch, tensile energy absorption (TEA) etc. Tissue Tensile Tester Electronic (UEC-1005 E) https://www.uecindia.com/tissue-tensile-tester-electronic-uec-1005-e.htm https://www.uecindia.com/tissue-tensile-tester-electronic-uec-1005-e.htm Tue, 15 Mar 2016 00:00:00 +0530 A fast, accurate and easy instrument for providing rapid and efficient determination of tensile strength and stretch of tissue and other soft material. The instrument is equipped with soft clamps which prevents test pieces from slipping or tearing during measurements. Adjustable Sample Cutter (UEC-1006A) https://www.uecindia.com/adjustable-sample-cutter-uec-1006a.htm https://www.uecindia.com/adjustable-sample-cutter-uec-1006a.htm Tue, 15 Mar 2016 00:00:00 +0530 Adjustable Precision Sample Cutter - Provided with an automatic clamping device, which by means of clamping beam, holds the sheet material firmly prior to the cutting action cutting size 210x300mm.Provision for cut the strip sample for tensile test Cutting width 15 mm X 300 mm. Sample Strip Cutter For Tensile Tester (UEC-1006A II) https://www.uecindia.com/sample-strip-cutter-for-tensile-tester-uec-1006a-ii.htm https://www.uecindia.com/sample-strip-cutter-for-tensile-tester-uec-1006a-ii.htm Tue, 15 Mar 2016 00:00:00 +0530 Simple paper strip cutter with the Provision to cut the strip sample for tensile test cutting width 15 mm x 300 mm. UEC-1007 B Folding Endurance Teste (schopper Type) https://www.uecindia.com/uec-1007-b-folding-endurance-teste-schopper-type.htm https://www.uecindia.com/uec-1007-b-folding-endurance-teste-schopper-type.htm Tue, 15 Mar 2016 00:00:00 +0530 A test piece is fastened vertically between two clamps. The upper clamp folds, the test piece by means of the reciprocating circular motion while the lower clamp maintain it under a given load. For determining thefolding endurance of all kinds of paper, paperboard, foils and films with a standard folding speed per minute. Folding Endurance Teste Schopper Type https://www.uecindia.com/folding-endurance-teste-schopper-type.htm https://www.uecindia.com/folding-endurance-teste-schopper-type.htm Tue, 15 Mar 2016 00:00:00 +0530 Schopper Type instrument with Five Figure digital Counter Loading clamps of spring type giving standard load of 1000 gm during the test  with Five –Figure digital Counter having hold and zero setting. UEC-1007 A Folding Endurance Teste (Kohler Molin Type) https://www.uecindia.com/uec-1007-a-folding-endurance-teste-kohler-molin-type.htm https://www.uecindia.com/uec-1007-a-folding-endurance-teste-kohler-molin-type.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument has a spring loaded clamping jaw constrained to move without rotation in a direction perpendicular to the axis of rotations of the specified folding head and having its clamping surface in the plane of this axis. Tearing Resistance Tester- Touch Screen Controlled Model (UEC-1008 B) https://www.uecindia.com/tearing-resistance-tester-touch-screen-controlled-model-uec-1008-b.htm https://www.uecindia.com/tearing-resistance-tester-touch-screen-controlled-model-uec-1008-b.htm Tue, 15 Mar 2016 00:00:00 +0530 Electronic Tearing Resistance Tester with standard medium 'B' pendulum with the facility of automatic clamping of the test specimen with a single touch, automatic calculations through Microprocessor based hardware which displays in values as well as in graph on touch screen cum graphical LCD control panel. UEC-1009 D I Circular Sample Cutter Punch & Die Type (100 CM 2) https://www.uecindia.com/uec-1009-d-i-circular-sample-cutter-punch-die-type-100-cm-2.htm https://www.uecindia.com/uec-1009-d-i-circular-sample-cutter-punch-die-type-100-cm-2.htm Tue, 15 Mar 2016 00:00:00 +0530 The Precision Test Strip Punch & Die Cutters are intended for accurate and rapid preparation of test pieces for use in tensile strength tests, ring crush tests, folding endurance test, water absorbency test and other similar tests without any deformation and damage. Circular Sample Cutter Punch & Die (UEC-1009DI) https://www.uecindia.com/circular-sample-cutter-punch-die-uec-1009di.htm https://www.uecindia.com/circular-sample-cutter-punch-die-uec-1009di.htm Tue, 15 Mar 2016 00:00:00 +0530 Circular Punch & Die Cutter is an excellent and convenient precision cutter for speedy and accurate cutting of specimen 100 cm2 in area without any deformation and damage. Automatic Circular Sample Die Cutter (UEC-1009DII) https://www.uecindia.com/automatic-circular-sample-die-cutter-uec-1009dii.htm https://www.uecindia.com/automatic-circular-sample-die-cutter-uec-1009dii.htm Tue, 15 Mar 2016 00:00:00 +0530 Automatic sample punch die cutter with adjustable punching cycle. Circular Punch & Die Cutter is an excellent and convenient precision cutter for speedy and accurate cutting of specimen 100 cm2 in area without any deformation and damage of paper & tissue. Square Sample Cutter Punch & Die (UEC-1009DIII) https://www.uecindia.com/square-sample-cutter-punch-die-uec-1009diii.htm https://www.uecindia.com/square-sample-cutter-punch-die-uec-1009diii.htm Tue, 15 Mar 2016 00:00:00 +0530 Square Punch & Die Cutter is an excellent and convenient precision cutter for speedy and accurate cutting of specimen 10 x 10 cm in area without any deformation and damage. It is extremely useful for the determination of basis weight in paper machines profile when used in conjunction with GSM Scale. Punch & Die Cutter Pneumatic Clamping (UEC-1009E) https://www.uecindia.com/punch-die-cutter-pneumatic-clamping-uec-1009e.htm https://www.uecindia.com/punch-die-cutter-pneumatic-clamping-uec-1009e.htm Tue, 15 Mar 2016 00:00:00 +0530 The Paper Guillotine has a sheet metal base and incorporates a guide for the material to be cut. Both top and bottom cutting blades are made from special knife steel and can be re sharpened. UEC-1010 Bii Bursting Strength Tester For Paper (Hand Wheel Type) https://www.uecindia.com/uec-1010-bii-bursting-strength-tester-for-paper-hand-wheel-type.htm https://www.uecindia.com/uec-1010-bii-bursting-strength-tester-for-paper-hand-wheel-type.htm Tue, 15 Mar 2016 00:00:00 +0530 For determining the Bursting Strength of Paper. Pressure is produced by electric motor and gear. Specimen is clamped between two concentric annuli by lever arm. Uniform pressure is produced and the plunger reverses automatically after rupture and saves testing time and increases diaphragm life. Bursting Strength Tester For Paper & Paper Board (UEC-1010 BII) https://www.uecindia.com/bursting-strength-tester-for-paper-paper-board-uec-1010-bii.htm https://www.uecindia.com/bursting-strength-tester-for-paper-paper-board-uec-1010-bii.htm Tue, 15 Mar 2016 00:00:00 +0530 The optimum instrument for determining the Bursting Strength of Paper, Paperboard liner raw paper, and corrugated board or solid fiberboard material Specimen is tightened by screw clamping through rotation of wheel handle. UEC-1010 Bii Bursting Strength Tester for Paper & Paper Board (Hand Wheel Type) https://www.uecindia.com/uec-1010-bii-bursting-strength-tester-for-paper-paper-board-hand-wheel-type.htm https://www.uecindia.com/uec-1010-bii-bursting-strength-tester-for-paper-paper-board-hand-wheel-type.htm Tue, 15 Mar 2016 00:00:00 +0530 For determining the Bursting Strength of Paper. Pressure is produced by electric motor and gear. Specimen is clamped between two concentric annuli by lever arm. Uniform pressure is produced and the plunger reverses automatically after rupture and saves testing time and increases diaphragm life. Bursting Strength Tester For paper & Paper Board (UEC-1010 D) https://www.uecindia.com/bursting-strength-tester-for-paper-paper-board-uec-1010-d.htm https://www.uecindia.com/bursting-strength-tester-for-paper-paper-board-uec-1010-d.htm Tue, 15 Mar 2016 00:00:00 +0530 For determining the bursting strength of paper and paperboard. Designed with pneumatic clamping of samples to avoid samples slippage under adjustable clamping force.  A test piece is clamped between two concentric plates, each having circular e by a rubber diaphragm, which is expanded by hydraulic pressure. Digital Bursting Strength Tester (UEC-1010 EII) https://www.uecindia.com/digital-bursting-strength-tester-uec-1010-eii.htm https://www.uecindia.com/digital-bursting-strength-tester-uec-1010-eii.htm Tue, 15 Mar 2016 00:00:00 +0530 For Paper, Paper Board & Corrugated Board  (Pneumatic Type). With Double Clamping System (Microprocessor based) Double clamping systems and dual range for paper, paperboard and corrugated board with a single equipment. Fully automatic control for pneumatic clamping of specimen and testing cycle. UEC-1012 A Densometer - Air Permeability Tester (Gurley Type) https://www.uecindia.com/uec-1012-a-densometer-air-permeability-tester-gurley-type.htm https://www.uecindia.com/uec-1012-a-densometer-air-permeability-tester-gurley-type.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for measuring porosity, air permeability or air resistance of paper and paper products by determining the time necessary for a certain volume of air to flow through the inserted sample, under a uniform pressure. UEC-1012 B Smoothness, Porosity & Softness Tester (Gurley Type) https://www.uecindia.com/uec-1012-b-smoothness-porosity-softness-tester-gurley-type.htm https://www.uecindia.com/uec-1012-b-smoothness-porosity-softness-tester-gurley-type.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for testing the average Smoothness, Porosity and Softness of paper and films by determining the time necessary for a certain volume of air to flow through the inserted sample, under a uniform pressure. UEC-1013 Smoothness & Porosity Tester (Bendtsen Type) https://www.uecindia.com/uec-1013-smoothness-porosity-tester-bendtsen-type.htm https://www.uecindia.com/uec-1013-smoothness-porosity-tester-bendtsen-type.htm Tue, 15 Mar 2016 00:00:00 +0530 The Roughness of paper or similar material is defined as the volume of air that is forced by a specified pressure difference escapes in unit time by passing between the surface of the specimen and flat metal ring resting on a specimen. Print Surface Roughness Smoothness Tester (UEC-1014) https://www.uecindia.com/print-surface-roughness-smoothness-tester-uec-1014.htm https://www.uecindia.com/print-surface-roughness-smoothness-tester-uec-1014.htm Tue, 15 Mar 2016 00:00:00 +0530 This equipment measures the roughness/smoothness as per the condition apply in the printing press nip at the moment of printing, by clamping the sample between a precise measuring head and a specially backing assembly with variable clamping pressure. UEC-1016 A Stiffness Tester (Taber Type) https://www.uecindia.com/uec-1016-a-stiffness-tester-taber-type.htm https://www.uecindia.com/uec-1016-a-stiffness-tester-taber-type.htm Tue, 15 Mar 2016 00:00:00 +0530 The instruments is designed for evaluating stiffness and resilient qualities of paper, plastics, cardboard, light metallic sheets, foil and other flexible material having comparatively strong bending resistance. UEC-1016 B Stiffness Tester (Touch Screen Controlled) https://www.uecindia.com/uec-1016-b-stiffness-tester-touch-screen-controlled.htm https://www.uecindia.com/uec-1016-b-stiffness-tester-touch-screen-controlled.htm Tue, 15 Mar 2016 00:00:00 +0530 he device is easy to handle due to a  user-friendly touch screen operation system. Display of individual values, graphs, statistic function and ratio. One end of the test piece is easily fastened into the clamp. Brightness, Opacity & Gloss Tester (UEC-1017) https://www.uecindia.com/brightness-opacity-gloss-tester-uec-1017.htm https://www.uecindia.com/brightness-opacity-gloss-tester-uec-1017.htm Tue, 15 Mar 2016 00:00:00 +0530 For electronically measuring and digitally presenting the Brightness, Opacity and Gloss of the paper and other similar material by angular reflectance (Photovolt Type)  Made with imported optical. UEC-1018 Brightness and Color Tester https://www.uecindia.com/uec-1018-brightness-and-color-tester.htm https://www.uecindia.com/uec-1018-brightness-and-color-tester.htm Tue, 15 Mar 2016 00:00:00 +0530 Brightness, Opacity & Color Tester - ISO type The Brightness & Color Meter makes measurement of brightness, color and opacity affordable in Production and QC applications. The Brightness & Color Meter measures color, color purity, UEC-1020 A Cobb Sizing Tester (Automatic Type) https://www.uecindia.com/uec-1020-a-cobb-sizing-tester-automatic-type.htm https://www.uecindia.com/uec-1020-a-cobb-sizing-tester-automatic-type.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for determining the water absorbency of paper, paperboard and similar material. The water absorbency of paper (the cobb value) is defined as the quantity of water absorbed in a given time by one side of a unit area of paper or board placed horizontally under a head of one centimeter of water. UEC-1020 B I Cobb Sizing Tester (Tilting Type) https://www.uecindia.com/uec-1020-b-i-cobb-sizing-tester-tilting-type.htm https://www.uecindia.com/uec-1020-b-i-cobb-sizing-tester-tilting-type.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for determining the water absorbency of paper, paperboard and similar material. The water absorbency of paper  (the cobb value) is defined as the quantity of water absorbed in a given time by one side of a unit area of paper or board placed horizontally under a head of one centimeter of water. UEC-1020 B II Cobb Sizing Tester (With Self Starting Timer) https://www.uecindia.com/uec-1020-b-ii-cobb-sizing-tester-with-self-starting-timer.htm https://www.uecindia.com/uec-1020-b-ii-cobb-sizing-tester-with-self-starting-timer.htm Tue, 15 Mar 2016 00:00:00 +0530 Cobb Tester with built-in couch roll and pivoting cylinder.This instrument is used for determining the water absorbency of paper, paperboard and similar material. The water absorbency of paper (the cobb value) is defined as the quantity of water absorbed in a given time by one side of a unit area of paper or board placed horizontally under a head of one centimeter of water. UEC-1021 Water Absorption Tester (Klemn Type) https://www.uecindia.com/uec-1021-water-absorption-tester-klemn-type.htm https://www.uecindia.com/uec-1021-water-absorption-tester-klemn-type.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for measuring the degree of water absorption of paper i.e. the capillary rise in millimeters by suspending a specimen in a vat filled with water. The capillary rise of water in paper is the water distance rise in a strip of a paper suspended vertically with its lower end immersed in water. Oil Penetration Tester (UEC-1022) https://www.uecindia.com/oil-penetration-tester-uec-1022.htm https://www.uecindia.com/oil-penetration-tester-uec-1022.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used fordetermining the penetration time of oil and other liquids through paper and other similar materials used for lamination purpose. Provided with cooling system, Electronic PID control for constant temperature regulation. Paper Surface Oil Absorbency Tester (UEC-1023) https://www.uecindia.com/paper-surface-oil-absorbency-tester-uec-1023.htm https://www.uecindia.com/paper-surface-oil-absorbency-tester-uec-1023.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used fordetermining the oil absorption resistance of the surface of paper and paperboard provided with Electronic self starting timer. A specimen is placed on a inclined plane surface covered with rubber offset blanket, the standard oil drops on brass roller and is rolled against the rubber blanket and the oil film on brass roller is transferred to the specimen surface. UEC-1026 A Laboratory Crush Tester https://www.uecindia.com/uec-1026-a-laboratory-crush-tester.htm https://www.uecindia.com/uec-1026-a-laboratory-crush-tester.htm Tue, 15 Mar 2016 00:00:00 +0530 The ring crush resistance of paper and paperboard is the maximum compressive force that a test piece will sustain without being crushed, the test piece being in the form of a ring standing on one end, and the force being applied to the other end under specified conditions. UEC-1026 B Laboratory Crush Tester (Electronic) https://www.uecindia.com/uec-1026-b-laboratory-crush-tester-electronic.htm https://www.uecindia.com/uec-1026-b-laboratory-crush-tester-electronic.htm Tue, 15 Mar 2016 00:00:00 +0530 Automatic Ring crush tester with touch screen control panel and graphic display of the test results with a single touch operation. This instrument is used for accurate testing of paper, paperboard, solid fiberboard & corrugated board for RCT, ECT, CCT,CLT, FCT, PAT & CMT test and its components as well as performing compression test on all small packages. Short Span Compression Tester (UEC-1027) https://www.uecindia.com/short-span-compression-tester-uec-1027.htm https://www.uecindia.com/short-span-compression-tester-uec-1027.htm Tue, 15 Mar 2016 00:00:00 +0530 The compressive index of a material the failure load per width/basis weight) increase with sheet density in much the same way as the tensile index. Hence fibre characteristics that contribute to density and flexural modulus of the sheet and the resilience of the fibres themselves are likely contributing factors. Paper Curl Tester (UEC-1028) https://www.uecindia.com/paper-curl-tester-uec-1028.htm https://www.uecindia.com/paper-curl-tester-uec-1028.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used to measure the Degree of curl when the paper sample exposed to water. This method applies the principle of wetting one side of the paper and determining the maximum curvature developed or the time required to reach maximum curvature . Tearing Resistance Tester (UEC-1008 A) https://www.uecindia.com/tearing-resistance-tester-uec-1008-a.htm https://www.uecindia.com/tearing-resistance-tester-uec-1008-a.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for measuring the resistance against tearing of paper, board, plastic films and other similar materials. An initial cut is made in a set of test piece, which are then torn through a given distance. Laboratory Air Knife Coater (UEC-4001) https://www.uecindia.com/laboratory-air-knife-coater-uec-4001.htm https://www.uecindia.com/laboratory-air-knife-coater-uec-4001.htm Tue, 15 Mar 2016 00:00:00 +0530 It is intended to coat the sample sheet materials in 10” X 12” size.This coater provides uniform coating of the coating medium on to the test specimen. The laboratory coater is eminently suitable for the coating of latex, ink, lacquer and plastic dispersions etc. Bar Coater Or K Coater (UEC-4002) https://www.uecindia.com/bar-coater-or-k-coater-uec-4002.htm https://www.uecindia.com/bar-coater-or-k-coater-uec-4002.htm Tue, 15 Mar 2016 00:00:00 +0530 Designed for the application of the paints, varnishes, adhesives, liquid printing inks starch and many other surface coating using wire wounded metallic bar under accurately controlled conditions with variable coating speed between 2 and 15 mm/min which provides uniform coating. Paper Testing Waxes (UEC-4004) https://www.uecindia.com/paper-testing-waxes-uec-4004.htm https://www.uecindia.com/paper-testing-waxes-uec-4004.htm Tue, 15 Mar 2016 00:00:00 +0530 Standard paper testing waxes are used for testing the surface strength of paper & Paper Board by the manufacturers of paper and coated paper, printers, lithographers, and other concerned with the development, inspection and control of paper for coating and printing purposes. Uec Printability Tester (UEC-4005) https://www.uecindia.com/uec-printability-tester-uec-4005.htm https://www.uecindia.com/uec-printability-tester-uec-4005.htm Tue, 15 Mar 2016 00:00:00 +0530 The UEC Printability Tester is used for laboratory testing of paper and ink in simulate actual condition as in printing. The equipment is designed to determine the accurate simulation of offset letter press printing, flexo printing and gravure printing on laboratory scale. Laboratory Calendering Machine (UEC-4006) https://www.uecindia.com/laboratory-calendering-machine-uec-4006.htm https://www.uecindia.com/laboratory-calendering-machine-uec-4006.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for performing calender experiments and trials in the laboratory environment.Provided with three roller stacks with a face width of 300 mm.    UEC-1015 A Fluff Tester (Patra Type) https://www.uecindia.com/uec-1015-a-fluff-tester-patra-type.htm https://www.uecindia.com/uec-1015-a-fluff-tester-patra-type.htm Tue, 15 Mar 2016 00:00:00 +0530 The fluff tester - Patra Type is intended for laboratory determination of the linting tendency / short fiber of un-coated printing paper. A sample is placed between the blanket & steel roll. It is moved between the roles under nip pressure. UEC-1015 B Fluff Tester (GFL Type) https://www.uecindia.com/uec-1015-b-fluff-tester-gfl-type.htm https://www.uecindia.com/uec-1015-b-fluff-tester-gfl-type.htm Tue, 15 Mar 2016 00:00:00 +0530 The fluff tester -GFL Type is intended for laboratory determination of the linting tendency / short fiber of un-coated printing paper. Impact Tester (UEC-3001) https://www.uecindia.com/impact-tester-uec-3001.htm https://www.uecindia.com/impact-tester-uec-3001.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for determining the impact strength of the boxes/containers made from cardboard, plastics or wooden materials. Different models are available in capacities ranging from 600-6000 pounds with necessary modifications in respect of track length, dolly size etc.    Carton Drop Tester (UEC-3002) https://www.uecindia.com/carton-drop-tester-uec-3002.htm https://www.uecindia.com/carton-drop-tester-uec-3002.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used to determine the physical impact of a package being dropped from a height in any position. Control and hoisting features facilitates all respects of operation: drop height setting and test reset. Package Shaker / Vibrating Table (UEC-3003) https://www.uecindia.com/package-shaker-vibrating-table-uec-3003.htm https://www.uecindia.com/package-shaker-vibrating-table-uec-3003.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for laboratory investigation of the resistance of packages and products to vibrations. Simulates the effects, which occur during transports by rail, truck or other means. Executes a harmonic sinusoidal vertical or horizontal motion or a combination of both. Concora Medium Fluter (UEC-3004) https://www.uecindia.com/concora-medium-fluter-uec-3004.htm https://www.uecindia.com/concora-medium-fluter-uec-3004.htm Tue, 15 Mar 2016 00:00:00 +0530 A laboratory corrugating machine for producing a sample to evaluate flat crush resistance of corrugating medium. For producing a sample to evaluate flat crush resistance of corrugating medium. ' Carton Board Creaser (UEC-3005) https://www.uecindia.com/carton-board-creaser-uec-3005.htm https://www.uecindia.com/carton-board-creaser-uec-3005.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for testing the crease ability of carton board. Ensures fault free folding the Carton Board Creaser (patra type) gives the board mill and the carton makes a ready and reliable method for checking the creasing qualities of carton boards. Box Compression Tester (UEC-3006) https://www.uecindia.com/box-compression-tester-uec-3006.htm https://www.uecindia.com/box-compression-tester-uec-3006.htm Tue, 15 Mar 2016 00:00:00 +0530 To determine the compression resistance of corrugated & non-corrugated boxes. The instrument provide the Digital Display of Load and deformation. Complete with memory for retaining peak value, automatic or normal zero setting, overload and over travel protection facilities. Puncture Resistance Tester (UEC-3007) https://www.uecindia.com/puncture-resistance-tester-uec-3007.htm https://www.uecindia.com/puncture-resistance-tester-uec-3007.htm Tue, 15 Mar 2016 00:00:00 +0530 Puncture Resistance : The puncture resistance of paperboard is measured as the energy required to force a puncture head of specified design through a test piece of the board under specified testing condition. Core Compression Strength Tester (UEC-3008 B) https://www.uecindia.com/core-compression-strength-tester-uec-3008-b.htm https://www.uecindia.com/core-compression-strength-tester-uec-3008-b.htm Tue, 15 Mar 2016 00:00:00 +0530 DIGITAL MODEL : This instrument is used for testing the core collapsing strength and has adjustable testing area to accommodate specimen sizes and shapes. Motorized operated piston to apply uniform pressure to crush the test sample. Abrasion Tester (UEC-3011) https://www.uecindia.com/abrasion-tester-uec-3011.htm https://www.uecindia.com/abrasion-tester-uec-3011.htm Tue, 15 Mar 2016 00:00:00 +0530 Designed to determine the wear and durability of paper and board, ceramics, plastic, textile, rubber, flooring, and painted lacquered and electroplated surfaces. Electrically driven with predetermined digital cycle counter selections between 1 to 99,999 with vacuum dust extractors. Scuff Tester (UEC-3012) https://www.uecindia.com/scuff-tester-uec-3012.htm https://www.uecindia.com/scuff-tester-uec-3012.htm Tue, 15 Mar 2016 00:00:00 +0530 To measure rub proofness of printed paper, carton package & board by applied contact pressure. Two contact disc rotate in contact at a same angular speed, giving constant relative velocity between all points of the disc. Ash Incinerator (UEC-1011) https://www.uecindia.com/ash-incinerator-uec-1011.htm https://www.uecindia.com/ash-incinerator-uec-1011.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for determining the ash content in paper, cardboard and other cellulosic material, by burning an exactly weighed quantity, and by obtaining the weight percentage of the remains. Digital Temperature Indicator. Moisture Meter (UEC-1025 A) https://www.uecindia.com/moisture-meter-uec-1025-a.htm https://www.uecindia.com/moisture-meter-uec-1025-a.htm Tue, 15 Mar 2016 00:00:00 +0530 The newly-designed P-2000 is an electrical resistance-type moisture meter, utilizing the relationship between moisture content and electrical resistance.   Laboratory Oven (UEC-5001) https://www.uecindia.com/laboratory-oven-uec-5001.htm https://www.uecindia.com/laboratory-oven-uec-5001.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for moisture determination of Pulp, Paper & Paperboard etc. Temperature range from room temperature to 250 ºC Air circulation by fan with digital temperature indicator cum controller. Muffle Furnace (UEC-5002) https://www.uecindia.com/muffle-furnace-uec-5002.htm https://www.uecindia.com/muffle-furnace-uec-5002.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for measuring the resistance against tearing of paper, board, plastic films and other similar materials. An initial cut is made in a set of test piece, which are then torn through a given distance. Environmental Chamber (UEC-5003) https://www.uecindia.com/environmental-chamber-uec-5003.htm https://www.uecindia.com/environmental-chamber-uec-5003.htm Tue, 15 Mar 2016 00:00:00 +0530 A sample of a paper or board is conditioned and said to be in equilibrium with the conditioning atmosphere when it has been exposed to the atmosphere long enough for the results of two weighing of a test piece, performed at an interval of at least 1 hour. Bod Incubator (UEC-5004) https://www.uecindia.com/bod-incubator-uec-5004.htm https://www.uecindia.com/bod-incubator-uec-5004.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for incubating BOD samples of effluent and others. Double walled, heavily insulated. Temperature ranges 5ºC to 50ºC. Accuracy ± 0. 5ºC. With digital Temperature Indicator cum controller. Hollander Beater (UEC-6001) https://www.uecindia.com/hollander-beater-uec-6001.htm https://www.uecindia.com/hollander-beater-uec-6001.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for uniform treatment of pulp under standard condition for producing the pulp as per commercial production. MS Fabricated tub lined with Stainless Steel ground and polished. volume 200 liters, 5 kg bone dry pulp. Provided with motor and V belt drive. Auto Vat (UEC-6002) https://www.uecindia.com/auto-vat-uec-6002.htm https://www.uecindia.com/auto-vat-uec-6002.htm Tue, 15 Mar 2016 00:00:00 +0530 Auto Vat machine is used for the preparation of handmade pulp sheets. A Vat with mesh frame is submerged in the water tank, through a lifting device mechanism for lifting the pulp sheet on fixed metallic screen connected with the foot paddle. Sheet Dryer (UEC-6003) https://www.uecindia.com/sheet-dryer-uec-6003.htm https://www.uecindia.com/sheet-dryer-uec-6003.htm Tue, 15 Mar 2016 00:00:00 +0530 The Dryer is suitable for quick drying of the hand made sheets. Screw Press (UEC-6004) https://www.uecindia.com/screw-press-uec-6004.htm https://www.uecindia.com/screw-press-uec-6004.htm Tue, 15 Mar 2016 00:00:00 +0530 It is used for de-watering of the handmade sheets, formed on the auto vat. A uniform pressure is exerted on the pulp sheets, placed between the platens with the help of wheel mounted on the lead screw. Screw Press (UEC-6005) https://www.uecindia.com/screw-press-uec-6005.htm https://www.uecindia.com/screw-press-uec-6005.htm Tue, 15 Mar 2016 00:00:00 +0530 It is used for de-watering of the handmade sheets, formed on the auto vat driven by an electric motor. A uniform pressure is exerted on the pulp sheets, placed between the platens. Rag Chopper (UEC-6006) https://www.uecindia.com/rag-chopper-uec-6006.htm https://www.uecindia.com/rag-chopper-uec-6006.htm Tue, 15 Mar 2016 00:00:00 +0530 The Rag Chopper is suitable to chop the Different Raw Material i.e, cotton Lintel, Jute, Gunny Bags, hosiery waste in small pieces to feed the digester / Beater. Calendering Machine (UEC-6007) https://www.uecindia.com/calendering-machine-uec-6007.htm https://www.uecindia.com/calendering-machine-uec-6007.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used to perform the calendering of the hand made sheets. Two roller stacks electrically driven, with a desired face width and adjustable line pressure have been provided. Ph Meter (UEC-5005) https://www.uecindia.com/ph-meter-uec-5005.htm https://www.uecindia.com/ph-meter-uec-5005.htm Tue, 15 Mar 2016 00:00:00 +0530 The sample is mixed with a measured amount of distilled water for one hour and the specific electrical conductance of the extract is determined.This instrument is used for measuring pH value of the of pulp solution or other similar material. Wet Strength Tester (UEC-2001) https://www.uecindia.com/wet-strength-tester-uec-2001.htm https://www.uecindia.com/wet-strength-tester-uec-2001.htm Tue, 15 Mar 2016 00:00:00 +0530 The Universal’s wet strength tester is used for measuring the initial wet strength & elongation. This instrument is used for measuring the maximum tensile force per unit width that a wet test piece, made from a pulp under specified conditions, will stand before breaking in a tensile test. Mechanical Type Beating & Freeness Tester (UEC-2002 A) https://www.uecindia.com/mechanical-type-beating-freeness-tester-uec-2002-a.htm https://www.uecindia.com/mechanical-type-beating-freeness-tester-uec-2002-a.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for determination of refining as freeness of wood fibre, ground wood Mechanical pulp and recycle fibers. It measures the drainage capacity of beaten pulp and checking the progress of beating process. Pneumatic Type Beating & Freeness Tester (UEC-2002 B) https://www.uecindia.com/pneumatic-type-beating-freeness-tester-uec-2002-b.htm https://www.uecindia.com/pneumatic-type-beating-freeness-tester-uec-2002-b.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for determination of refining as freeness of wood fibre, ground wood Mechanical pulp and recycle fibers. It measures the drainage capacity of beaten pulp and checking the progress of beating process. Canadian Type Beating & Freeness Tester (UEC-2003) https://www.uecindia.com/canadian-type-beating-freeness-tester-uec-2003.htm https://www.uecindia.com/canadian-type-beating-freeness-tester-uec-2003.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for determination of freeness of wood fibre ground wood and mechanical pulp. It measures the Canadian Freeness number which is a measurement of the drainage capacity of different pulp types. Consistency Determination Apparatus (UEC-2004) https://www.uecindia.com/consistency-determination-apparatus-uec-2004.htm https://www.uecindia.com/consistency-determination-apparatus-uec-2004.htm Tue, 15 Mar 2016 00:00:00 +0530 Consistency determination apparatus for quick determination of pulp/stock consistency. The measured stock is poured on to the grid plate of the equipment and drained under suction. The filtration is repeated until the filtrate becomes perfectly clear. Hand Sheet Former (UEC-2005 A) https://www.uecindia.com/hand-sheet-former-uec-2005-a.htm https://www.uecindia.com/hand-sheet-former-uec-2005-a.htm Tue, 15 Mar 2016 00:00:00 +0530 Hand Sheet former (Model TAPPI Type) for production of laboratory paper sheets for physical tests. The design of the drainage system provides a uniform flow across the entire wire, thus permitting exceptionally uniform sheets. UEC-2005 B Hand Sheet Former (SCA Type) https://www.uecindia.com/uec-2005-b-hand-sheet-former-sca-type.htm https://www.uecindia.com/uec-2005-b-hand-sheet-former-sca-type.htm Tue, 15 Mar 2016 00:00:00 +0530 For production of laboratory paper sheets for physical tests. The design of the drainage system provides a uniform flow across the entire wire, thus permitting exceptionally uniform sheets. UEC-2005 C Hand Sheet Former (KCL Type) https://www.uecindia.com/uec-2005-c-hand-sheet-former-kcl-type.htm https://www.uecindia.com/uec-2005-c-hand-sheet-former-kcl-type.htm Tue, 15 Mar 2016 00:00:00 +0530 For production of laboratory paper sheets for physical tests. The design of the drainage system provides a uniform flow across the entire wire, thus permitting exceptionally uniform sheets. Laboratory sheets, prepared from suspenstions of pulp are used for determining physical properties such as apparent density etc. UEC-2005 E Hand Sheet Former (Semi- Automatic Sheet Former) https://www.uecindia.com/uec-2005-e-hand-sheet-former-semi-automatic-sheet-former.htm https://www.uecindia.com/uec-2005-e-hand-sheet-former-semi-automatic-sheet-former.htm Tue, 15 Mar 2016 00:00:00 +0530 Semi-Automated Sheet Former Touch screen controlled with White Water Re-Circulation System, Pneumatic Sheet Press & Rapid Dryer mounted on a base table complete with accessories. The apparatus is equipped with automatic regulation of filling of water, air agitation, settling & drainage. UEC-2006 A Laboratory Sheet Press - Circular Type (Hydraulic Controlled) https://www.uecindia.com/uec-2006-a-laboratory-sheet-press-circular-type-hydraulic-controlled.htm https://www.uecindia.com/uec-2006-a-laboratory-sheet-press-circular-type-hydraulic-controlled.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for pressing and de-watering the sheet quickly made on sheet making machine. Hydraulic Type Manually Operated and plunger type pump is employed for raising the pressure gradually. Working pressure 3.5 kg/cm2 UEC-2007 B Laboratory Sheet Press Square Type (Pneumatic Controlled) https://www.uecindia.com/uec-2007-b-laboratory-sheet-press-square-type-pneumatic-controlled.htm https://www.uecindia.com/uec-2007-b-laboratory-sheet-press-square-type-pneumatic-controlled.htm Tue, 15 Mar 2016 00:00:00 +0530   Sheet Press provided with two adjustable timers i.e.12 & 6 minutes for pressing of two sequential de-watering of sheets. Working pressure 3.5 kg/cm2, Standard Model sheet size dia 165 mm.   UEC-2007 C Laboratory Sheet Press- Square Type (Pneumatic Controlled) https://www.uecindia.com/uec-2007-c-laboratory-sheet-press-square-type-pneumatic-controlled.htm https://www.uecindia.com/uec-2007-c-laboratory-sheet-press-square-type-pneumatic-controlled.htm Tue, 15 Mar 2016 00:00:00 +0530 For KCL TYPE SHEET FORMER - Pneumatically operated sheet press suitable for de-watering of square sheets, provided with two adjustable timers i.e. 12 & 6 minutes pressing with adjustable timing for two sequential de-watering of sheets. Pressing force maximum 16 kN. Pulp Disintegrator (UEC-2008) https://www.uecindia.com/pulp-disintegrator-uec-2008.htm https://www.uecindia.com/pulp-disintegrator-uec-2008.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for standardized disintegration of pulp to a homogeneous suspension required for preparation of laboratory hand sheet and other purpose. Pivoted drive unit with stainless steel propeller and shaft. Rapid Sheet Dryer (UEC-2009) https://www.uecindia.com/rapid-sheet-dryer-uec-2009.htm https://www.uecindia.com/rapid-sheet-dryer-uec-2009.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for shortening the drying time of wet pulp or paper samples before determining the dry weight or moisture content. It is provided with flat heating elements.Stainless steel sheet fabrications with insulating material ensure long service life. Sheet Drying Cylinder (UEC-2010) https://www.uecindia.com/sheet-drying-cylinder-uec-2010.htm https://www.uecindia.com/sheet-drying-cylinder-uec-2010.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for drying the lab pulp hand sheets or paper samples as per commercial production in laboratory. The process helps to prevent wrinkling and shrinkage in the dried samples. Sheet Drying Cabinet (UEC-2011) https://www.uecindia.com/sheet-drying-cabinet-uec-2011.htm https://www.uecindia.com/sheet-drying-cabinet-uec-2011.htm Tue, 15 Mar 2016 00:00:00 +0530 The Drying Cabinet is used for faster drying and conditioning the hand sheets after pressing. The hot air passes through the holes in the drying ring to dry without effecting the surface or Brightness of the hand sheets.  Laboratory Wood Chipper (UEC-2012) https://www.uecindia.com/laboratory-wood-chipper-uec-2012.htm https://www.uecindia.com/laboratory-wood-chipper-uec-2012.htm Tue, 15 Mar 2016 00:00:00 +0530 For preparation of chips from wood, bamboo and other similar material for laboratory cooking trial and educational purposes. Input tube diameter 80 mm set at and angle of about 500. Wood Chip Classifier (UEC-2013) https://www.uecindia.com/wood-chip-classifier-uec-2013.htm https://www.uecindia.com/wood-chip-classifier-uec-2013.htm Tue, 15 Mar 2016 00:00:00 +0530 Chip Classifier used for rapid, reproducible and accurate classification of wood chips in respect to size and thickness by using standard sized screening trays mounted on a shaking mechanism with specified frequency. Lab Mechanical Crusher (UEC-2014) https://www.uecindia.com/lab-mechanical-crusher-uec-2014.htm https://www.uecindia.com/lab-mechanical-crusher-uec-2014.htm Tue, 15 Mar 2016 00:00:00 +0530 Lab Crusher is used for preparation of wood meal from the samples of different woods used for chemical analysis and grinding virtually to produce a finely meshed sample. Llaboratory Rotary Digester (UEC-2015) https://www.uecindia.com/llaboratory-rotary-digester-uec-2015.htm https://www.uecindia.com/llaboratory-rotary-digester-uec-2015.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for producing pulp from various fibrous material under specified and controlled condition under pressure, temperature and time. Maximum pressure 15 kg/cm2. Electrically heating system provided with Microprocessor based temperature indicator cum controller with facility of more detailed pre-programming to control the boiling sequence. Laboratory Research Digester (UEC-2016) https://www.uecindia.com/laboratory-research-digester-uec-2016.htm https://www.uecindia.com/laboratory-research-digester-uec-2016.htm Tue, 15 Mar 2016 00:00:00 +0530 The Digester is a complete pulping unit for producing pulps by cooking the wood chips in a manner similar to a commercial digester. The unit is easy to operate and features precise Temperature control of pulping variables to ensure good repeatability of the results. Lab Disc Refiner (UEC-2019) https://www.uecindia.com/lab-disc-refiner-uec-2019.htm https://www.uecindia.com/lab-disc-refiner-uec-2019.htm Tue, 15 Mar 2016 00:00:00 +0530 This instrument is used for wet grinding and de-fibrating chips or experimental pulp making. Utilized for developing pulping processes and strength development studies on raw, steamed or chemically cooked chips, fully cooked pulp, cooked straw, waste paper and many other materials.